A Raymond mill with strong completeness and independent production system. 【Processing capacity】: 3-22T/h 【Scope of application】: Xinhai Raymond Mill grinds various non-flammable and explosive mineral materials with Mohs hardness below 9.3 and humidity below 6%; such as cement (raw clinker), talc, feldspar, quartz, slag, mica , calcite, limestone, barite, potassium sulfate, bentonite, and more than a thousand kinds of materials.
The grinding roller assembly is connected by a tie rod and a high-pressure spring, and the generated force avoids the loss of the equipment by large pieces of material. The elastic connection between the main machine and the powder separator reduces vibration and noise and improves the service life of the equipment;
Because the pulverizer integrates crushing, drying, grinding, and grading and conveying, the system is simple and the layout is compact.
The grinding roller device adopts overlapping multi-stage sealing, which has good sealing performance;
Unique air self-circulation system, with advanced dust collector, carry out the concept of environmental protection to the end;
The high-density and high-precision impeller device increases the output of finished products by more than 50% under the same power. The high-efficiency and energy-saving centrifugal induced draft fan greatly improves the efficiency of the induced draft fan. The convenient and quick impeller adjustment device improves the precision of the finished product.

Large bulk materials crushed by the jaw crusher to the needed size are fed into the storage hopper by a mine hoist and then fed into a grinding chamber of main engine uniformly, quantitatively and continuously by a electromagnetic vibrating feeder for grinding. Grinded materials are blown into separator by blower for classification. With the function of impellers in the separator, materials without meeting the requirements of the fineness are fallen into a grinding chamber for grinding again; materials meeting the requirements of the fineness are blown into a cyclone powder collector with airflow through pipelines for separation and collection. The powder from a discharging device is the finished product. Separated airflow is back to blower through return duct on the top of the cyclone powder collector.
| Model | Max. Feed Size (mm) | Finished Product Size (mm) | Production Capacity (t/d) | Rotating Speed of Main Motor (r/min) | Main Motor Power (kw) | Milling Ring Diameter (mm) | Milling Ring Height (mm) | Milling Roller Diameter (mm) | Milling Roller Height (mm) | Milling Roller Qty. | Overall Dimension(m) (Length × Width × Height) |
| MTM75 | <15 | 0.613-0.033 | 1-3 | 160 | 18.5 | Inner Diameter 780 | 150 | 260 | 150 | 3 | 4.3×3.5×5.1 |
| MTM85 | <20 | 0.613-0.033 | 1.2-4.6 | 150 | 22 | Inner Diameter 830 | 140 | 270 | 140 | 3 | 5.3×4.1×5.2 |
| MTM100 | <25 | 0.613-0.033 | 2.1-5.6 | 130 | 37 | Inner Diameter 950 | 170 | 310 | 170 | 4 | 7.1×5.9×7.9 |
| MTM130 | <30 | 0.613-0.033 | 3-9.5 | 103 | 75 | Inner Diameter 1280 | 210 | 410 | 210 | 5 | 7.85×8×9.7 |
| MTM160 | <35 | 1.6-0.045 | 5-22 | 82 | 132 | Inner Diameter 1600 | 270 | 440 | 270 | 6 | 12.55×5.7×8.3 |

In a dry grinding process, the autogenous mill selected by the concentrator has serious equipment consumption, low efficiency, and the output particle size is larger than the expected particle size. In this case, the concentrator chooses Raymond mill. Raymond mill is an ideal equipment for dry grinding. It has higher efficiency than ball mills, low power consumption, low power consumption, and uniform discharge. The most important thing is that it integrates crushing, grinding and grading. The system is simple, the impeller device, the output The particle size of the material is small, which not only improves the production capacity but also reduces the investment cost, and the customer satisfaction is very high.