Home Products Dry Ball Mill
Dry Ball Mill

Dry Ball Mill

A ball mill equipment for processing dry materials. 【Processing capacity】: 0.25-100t/h 【Scope of application】: It is used in beneficiation, building materials, metallurgy and chemical industries, and most of the processed materials are metal ores.

Advantages

1. The dry ball mill has strong material adaptability, can be continuously produced, and is easy to adjust the fineness of milled products;

2. The discharge port adopts a straight cylindrical design and is equipped with a draft device, which has a good dust removal effect;

3. It can be used for open-flow grinding, and can also be used for circulating ring grinding composed of powder separator;

4. The overflow type dry ball mill or the grid type dry ball mill can be selected according to the material and the discharge method;

5. The materials produced after dry grinding are qualified materials;

6. According to the process, it can be divided into left-handed and right-handed;

7. The dry ball mill has a simple structure and is easy to maintain. The hollow shaft is made of cast steel, and the lining is more convenient to replace.

Note: The moisture content of the dry ball mill should not be too high, otherwise the material will be easy to stick, resulting in poor ore discharge.

Working Principle

2-1.gif
The materials are uniformly sent to the first chamber of the dry ball mill by the feeding device through the feeding hollow shaft. The first chamber of the dry ball mill contains stepped lining board or corrugated lining board, and steel balls of different specifications. The centrifugal force generated by the cylinder rotation will bring the steel balls to a certain height and then drop down, which will have a pounding and grinding effect on the materials. After the rough grinding is finished in the first chamber of the dry ball mill, the materials will enter into the second chamber through the single-wall partition, which is lined with the flat lining board and steel balls to further grind the materials. The powder material is discharged through discharge grates, then the grinding operation is completed.

Technical Parameters

ModelDrum speed
(r/min)
Ball load
(t)
Feed size
(mm)
Discharging size
(mm)
Yield
(t/h)
Motor power
(kw)
Total weight
(t)
Ф900×180036-381.5≤200.075-0.890.65-218.55.85
Ф900×3000362.7≤200.075-0.891.1-3.5226.98
Ф1200×2400363≤250.075-0.61.5-4.83013.6
Ф1200×3000363.5≤250.074-0.41.6-53714.3
Ф1200×450032.45≤250.074-0.41.6-5.85515.6
Ф1500×300029.77.5≤250.074-0.42-57519.5
Ф1500×45002711≤250.074-0.43-611022
Ф1500×57002812≤250.074-0.43.5-613025.8
Ф1830×300025.411≤250.074-0.44-1013034.5
Ф1830×450025.415≤250.074-0.44.5-1215538
Ф1830×640024.121≤250.074-0.46.5-1521043
Ф1830×700024.123≤250.074-0.47.5-1724543.8
Ф2100×300023.715≤250.074-0.46.5-3615545
Ф2100×450023.724<250.074-0.48-4324556
Ф2100×700023.726<250.074-0.412-4828059.5
Ф2200×450021.527<250.074-0.49-4528054.5
Ф2200×650021.735<250.074-0.414-2638061
Ф2200×700021.735<250.074-0.415-2838062.5
Ф2200×750021.735<250.074-0.415-3038064.8
Ф2400×30002123<250.074-0.47-5024558
Ф2400×45002130<250.074-0.48.5-6032072
Ф2700×400020.740<250.074-0.422-8038095
Ф2700×450020.748<250.074-0.426-90480102
Ф3200×45001865<250.074-0.4According to the process conditions630149
Ф3600×45001790<250.074-0.4According to the process conditions850169
Ф3600×600017110<250.074-0.4According to the process conditions1250198


Success Cases

ganshiqiumoji2.jpg
A processing plant in Gansu was built for the second time and wanted to re-select a dry ball mill manufacturer. The equipment failure rate was too high in the early stage of construction, which seriously affected the productivity of the entire processing plant. Later, through the introduction of an old friend, I met Xinhai. As soon as I got to know it, I purchased 2 dry ball mills from Xinhai and applied them to the processing plant. It has been officially put into production, and no abnormality has been found, and the work efficiency has increased by 12% compared with the expected.

Leave Your Need