Home Products Chute Feeder
Chute Feeder

Chute Feeder

A periodic reciprocating feeder device for bulk materials. 【Processing capacity】: 10~90t/h 【Scope of application】: It is suitable for short-distance conveying of bulk materials with a feed size of less than 160 mm. In mines, processing plants, chemicals, cement, building materials and other departments, it is widely used for uniform and continuous feeding from storage silos to crushing, transportation and other machinery.

Advantages

The trough feeder can be erected on the ground or hoisted on the discharge port of the mine bin;

Change and control the flow at any time, easy to operate and evenly adjust the amount of ore feeding;

The groove bottom plate reciprocates, the stroke can be properly adjusted by the eccentric wheel of the driving device, and the eccentric distance is half of the stroke;

According to the production practice of some concentrators, for sticky ores, the eccentricity should not be less than 30 mm;

The width of the trough body of the trough feeder is about 2-2.5 times the upper limit particle size of the feeding.

Working Principle

separation-Chute-Feeder.jpg

The machine is usually installed underneath the discharging opening of the ore bin. Minerals fall on the bushing. The bushing is located at the chute bottom, configured on the idler wheel, and via an eccentric device connected with a reducer which is linked to an electric motor by a coupler. When it works, the electric motor drives a reducer via a coupler; eccentric disk and drain cap which is situated between the chute frame bottom and roller begins to do reciprocal and linear motion to uniformly feed minerals.

Technical Parameters

ModelOutlet    Dimension (W X H) (mm)Max. Feed Size (mm)Feed Capacity (t/h)Motor ModelMotor Power
 (kW)
Weight
 (kg)
CG300X300300X3005010~20Y90L- 41. 5265
CG400X400400    X40010010~30YCT160-4A2. 2640
CG600X500600    X50020010~50Y112M- 441045
CG700X500700    X50020010~601100
CG1240X9801240X98035036~90Y160M- 67. 51710


Success Cases

procase-Chute-Feeder.png

A lead and zinc factory in Shanxi contacted Xinhai Mining to undertake its crushing and screening work. Before crushing, a device is required to feed the jaw crusher, and the particle size of the ore to be processed is about 350mm, so a trough feeder is selected. The equipment is hoisted on the discharge port of the silo, and the equipment can also be erected on the ground as required. In practical application, the punching frequency of the groove bottom plate reaches 60 times/min, the stroke is 200mm, and the feeding is uniform. At the same time, the setting of the speed regulating motor provides convenience for adjusting the feeding amount.

Leave Your Need